Skip to content
Specialist Fisher & Paykel Appliance Repair in Los Angeles
Error Code

Fisher & Paykel Washer 162 Error Code

Content status: Verified

Error code 162
Appliance Washer
Quick answer

Code 162 is a brake deceleration time-out that the manual says was installed for software testing only; no cause or action is given.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 162 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Brake deceleration time-out: the basket did not stop in time after falling below 100 rpm; the manual says the code is there for software testing only.

Very short entry

The Fisher & Paykel manual enters 162 as “Brake Deceleration Time-out Fault” and ties it to Phases 3, 4 and 5. Only a few lines are given, so only a little can be said.

How the fault is defined

While the machine brakes, the Motor Controller keeps watch as the basket slows down. After the speed falls below 100 rpm, a fixed amount of time is allowed for the basket to come to rest. If that time runs out first, the controller flags 162.

A further sentence marks it out from nearby codes, namely that the fault “has been installed for software testing only.” There is no primary source, no secondary source and no action listed.

What the owner is left with

  • The source gives 162 neither a reset sequence nor a checklist.
  • Should it appear, write the code down precisely together with the washer’s activity, a spin ending for example.
  • Before anyone looks inside, the power goes off at the wall, as for any repair.

Braking codes that have procedures

  • 164: braking has gone on for 20 seconds, and the manual begins with the motor wiring.
  • 34: a fault of the brake resistor, found on Phase 1 only.
  • 136: the motor stalling.

Limits of the source

Since no cause or action is given, whether 162 points to any part is unknown.

Fisher & Paykel washer repair in Los Angeles

Ring (310) 872-1939 with the model number and the code, and mention what the washer did right before the display changed.

Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your Fisher & Paykel appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to get your Fisher & Paykel appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Los Angeles & Orange County

Request your repair

Fields marked with * are required.

Call Request Repair