Fisher & Paykel Refrigerator F50 to F55 Error Codes: Wine Cabinet Sensor Issue

Six codes, one entry

Fisher & Paykel’s wine cabinet fault list gives F50 to F55 one shared meaning: sensor issue. It applies to the RS6009V2R1, RS6009V2RT1, RS2435V2R1 and RS2435V2RT1. The article does not state which sensor each number concerns.

Every one of the six reads sensor issue. Think of a sensor as a tiny gauge feeding numbers to the controller; once those numbers stop being believable, the display shows a fault in their place.

The reset allowed by the manufacturer

1. Cut the cabinet’s power with the wall switch or isolation switch.
2. Leave it for 30 seconds.
3. Switch the power on once more.
4. Watch to see whether the same code returns.

With the code gone and the cabinet behaving normally, a visit is only needed should it come back. A code that stays, or returns, calls for service.

Do not reset when

• there is a burning smell, smoke or sparking;
• the supply keeps tripping;
• water is near electrical parts, or something is actively leaking.

Disconnect at the wall if safe and request service. Do not lift off panels or test wiring. A cabinet that has stopped cooling means the wine should be moved to a cool place for protection.

Similar sensor codes

• F3 to F10 are the temperature-sensing codes listed for these cabinets.
• F67 means the humidity sensor gives no response.

Wine cabinet service in Los Angeles

When you ring (310) 872-1939, give the exact code, the model number and product code, and say whether you tried the reset. Mention whether the code appeared at start-up or during normal running. Related information sits on the repair page.

Source: Fisher & Paykel Support, Wine Cabinet Fault Codes