Fisher & Paykel Range F225 Error Code: Cooling Fan Error

What F225 is

F225 is the guide’s entry for a cooling fan error on freestanding cookers. The fans matter more than they look: the same guide tells owners to wait for them to stop before any reset, since they keep running after cooking to move heat out.

Manufacturer’s instruction

• F225 has no fix of its own.
• It falls under “for all other fault codes”, which says to book a service repair.
• The cool-down and restart sequence in the guide is for door lock and for board or software errors, not for this one.

Treat a heat-removal fault with care

Because the fault concerns the part that carries heat away, more cooking would only make matters worse. Turn off every cooking function and leave the door closed until the range is cool. Cutting power to a hot oven is best avoided; the guide says it can damage the oven and the cabinets.

Useful details to note

• Is any fan audible once cooking has finished?
• Did the code show up while cooking or afterwards?
• Does the area around the top or sides of the range feel warmer than normal?

Not to be mixed up

The guide gives E8 as an oven fan error, a separate entry, so do not assume the two are one fault. On combi ovens, F225 describes a fan stall instead.

• E8 on ranges.
• F101 group: the board and software errors, which do have a cool-down reset.

Range repair in Los Angeles

Booking Fisher & Paykel range repair in Los Angeles starts with a call to (310) 872-1939. Mention F225 and the model number, and read the notes above to the person on the phone.

Source: Fisher & Paykel Support, F, A, E or U displaying on Freestanding Cooker