F225 means the cooling fan of the combi oven stalled; reset once cool and book service if it returns.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F225 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Fisher & Paykel lists F225 on its combi oven as a cooling fan stall error.
Heat is kept away from an oven’s electronics by a fan that pushes air through. A Fisher & Paykel combi oven that displays F225 is flagging a cooling fan stall error, meaning the fan received the command to rotate and then did not carry on.
Reset, per the manufacturer
According to Fisher & Paykel, a reset can clear certain faults, so long as the oven has cooled all the way and its fan is at rest. Power down at the supply, give it a minute, then switch on. A second appearance of F225 means a service booking.
What you can notice
How warm the oven still is. Heat is not cleared by a stalled fan, so allow time.
Any fan noise once a cycle ends. Quiet when the fan ought to be running is worth passing on.
Anything sitting over the vents near the oven, for instance a tray, a towel or items in storage.
The manufacturer does not list these as steps. They are only safe observations, made without opening the oven.
Caution
Because the fault sits with the part that carries heat away, normal care matters even more. Do not keep running the oven in hope that it settles down. Inspecting the fan and its drive belongs to a technician. How long a stalled fan can run before it causes problems is not stated, so stop cooking and wait for the visit.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Fisher & Paykel appliance?
Book a specialist visit for a clear estimate and approval before any repair.
